免费成人av网址,国产一区二,九色综合网

PVC waterproofing membrane production line

admin — Wed, 12 Feb 2025 07:44:29 +0000

The polymer self-adhesive waterproof membrane equipment has many functions such as automatic integrated design, man-machine interface control and setting of the whole machine, and automatic computer tracking control. Product production efficiency and product quality. The automatic batching system adopts PLC control technology, fully automatic feeding and batching, and automatic feeding of raw materials in the whole process, which makes the ratio of raw materials more accurate, ensures the consistency of the same product formula, and the quality is more stable.

Applicable to various roof waterproofing in industry and construction, basement, reservoir, dam, highway tunnel, railway tunnel, air raid shelter, grain depot, wastewater treatment and other building waterproofing projects

This production line is a new type of polymer waterproof membrane production line, which is a new type of polymer waterproof membrane production line, which is mixed and extruded by adding polyresin and various polymer additives at one time. The products produced by this equipment have high density, smooth surface, no wrinkle, stable performance and reliable quality. The equipment is electronically controlled, has a high degree of automation, and is easy to operate.

PVC crust foam board equipment wood veneer decorative board equipment

admin — Wed, 12 Feb 2025 07:43:36 +0000

#PVC solid foam wallboard equipment# With the progress of society and the improvement of people's living standards, people's pursuit of aesthetics is also getting higher and higher. The rise of integrated wall panels has met people's needs for interior decoration. The various advantages of bamboo and wood fiber wallboard and stone-plastic wallboard compared to ordinary wallboard determine their market development prospects. Therefore, in recent years, there have been many customers purchasing integrated wallboard equipment, and wallboard equipment with three specifications such as 300mm, 400mm and 600mm has also occupied the market. Another new type of wallboard equipment was launched. The pvc crust foamed solid wood veneer wallboard equipment was born. The common production specification of this new type of wallboard is 1220mm*2440mm. So what are the assembly and production characteristics of such a new set of solid pvc wall panel equipment?

PVC crust foam board equipment, wood veneer decorative board equipment complete set of equipment: consists of mixer, automatic drying and feeding machine, twin-screw 80 extruder, foam board extrusion die, water cooling setting platform, eight It is composed of roller tractor, transverse cutting machine, manipulator blanking rack, crusher and pulverizer.

Assembly characteristics of PVC crust foam board equipment and wood veneer decorative board equipment: The mold material is made of mold steel, which is strong and durable. The main motor speed regulation mode is controlled by the AC inverter. The extruder is twin screw, the power is 75kw, and the extrusion output is high. The water-cooled setting mold adopts a three-stage setting mold, and the cooling setting effect is good. The traction machine is eight-roller traction, with stable traction and high traction efficiency. The newly upgraded blanking frame - the manipulator blanking frame, the unloading plate is smooth and neat. The production line has a high degree of automation, stable operation, low failure rate, complete set of equipment automation, and easy installation and operation.

Production process: raw material batching - high-speed mixer - automatic feeding - high temperature screw extrusion - water cooling shaping - cooling bracket - eight-roller traction - transverse cutting - manipulator blanking.

What is the forming equipment of the pipe production line

admin — Wed, 12 Feb 2025 07:42:52 +0000

The forming of the pipe production line is completed by the mold, the sizing sleeve and the cooling device. The mold for producing plastic pipes is composed of a shunt bracket, a mold body, a mandrel, and a forming die. Due to the different shearing force when the material flows through the support, the shearing force near the support is greater than that at the center. In the support area, the flow of the material has a certain speed difference. If the compression ratio of the mold is too small or the straight section is too short , there will be stent traces on the inner wall of the tube, and longitudinal cracks will be left in severe cases.

If the polyolefin type large-diameter pipe uses a bracket-type mold, it will form the longitudinal ridges on the inner wall of the pipe due to the current stent. Therefore, micropores are generally used in the production of large-diameter high-density polyethylene pipes, gas pipes and some important new material polyolefin pipes. In order to ensure the correct geometric shape, dimensional accuracy and roughness of the tube, the tube blank with a relatively high temperature must be sizing and cooling after leaving the die, and the sizing device plays this role. There are generally two sizing methods for pipes, outer sizing and inner sizing.

PE series plastic pipe production line is mainly used for the production of agricultural water supply and drainage, building water supply and drainage, cable laying and so on. The unit consists of a vacuum setting table, a tractor, a cutting machine, a turning frame, etc. The single-screw extruder and traction machine use AC frequency conversion speed regulation device, and the vacuum pump and traction motor are all high-quality products. The tractor has two-claw, three-claw, four-claw, six-claw, eight-claw, ten-claw, twelve-claw and other traction methods. Chipless cutting, saw blade cutting or planetary cutting can be selected, the unit has reliable performance and high production efficiency. Equipped with a special device, the inner wall spiral tube is produced, and the inner wall hollow tube and core layer foam tube unit can replace the extruder, which can produce PP, PE, ABS, PPR, PEX, silicon core tube and other material pipes. The planetary cutting machine adopts automatic computer numerical control, which has the advantages of convenient operation and reliable performance, reaching the international level.